Pekoe Mortgages
Pekoe Mortgages · Ask a Broker · Market data

Ontario and Alberta housing benchmarks by board area, September 2026

Every CREA MLS Home Price Index benchmark we hold for Ontario and Alberta, in one table, with the year-over-year change and what each figure means for a minimum down payment. Thirty board areas plus the national and provincial composites, read from CREA’s own data archive on 5 November 2026.


All broker questions

Chat connects you to the Pekoe team during business hours. Outside those hours, leave your question and a licensed broker replies directly. No AI persona pretending to be an advisor.

The measure

What is a benchmark price, and what is it not?

Short answer

A benchmark is the modelled price of a typical home in an area, held constant so that month-to-month changes reflect price movement rather than a change in what happened to sell. It is not an average, and it is not a valuation of any particular house.

The distinction matters because averages and benchmarks move for different reasons. If three expensive houses sell in a quiet month, the average jumps and the benchmark does not. That is the whole purpose of a price index, and it is why lenders, boards and analysts quote benchmarks rather than averages when they want to describe a trend.

Two further cautions apply to every figure on this page. A board area is not a municipality. “Kitchener-Waterloo” is a real estate board’s area and takes in more than the two cities; “Guelph and District” and “Brantford Region” say so in their names. And a board’s own published benchmark for the same month can differ from CREA’s, because boards aggregate their areas differently.

So treat these as the right numbers for comparing areas and periods, and the wrong numbers for pricing a specific property.

The citable fact: an MLS Home Price Index benchmark is the modelled price of a typical home in a board area rather than an average of what sold, which is why it moves with prices rather than with the mix of sales.

The table

What are the benchmarks for every area we hold?

Short answer

Thirty board areas plus the national, Ontario and Alberta composites, for September 2026, not seasonally adjusted. The composite is the headline figure. Where a property type says “not published”, CREA does not publish that series for that area.

”
“.

CREA MLS Home Price Index benchmarks, September 2026, not seasonally adjusted. Year over year is our calculation.
AreaCompositeYear over yearSingle-familyTownhouseApartment
Canada, national aggregate$651,400-3.4%$723,500$590,700$455,700
Alberta, provincial$508,500-0.4%$606,500$379,400$264,900
Ontario, provincial$736,300-3.9%$814,900$581,400$484,900
Board areas, by composite benchmark
Oakville-Milton$1,023,000-4.2%$1,221,100$678,400$524,100
Greater Toronto$917,600-4.7%$1,116,700$668,800$527,200
Mississauga$903,600-6.4%$1,176,500$697,000$478,400
Guelph and District$720,200-3.6%$837,800$564,300$461,000
Hamilton-Burlington$718,600-5.1%$811,300$599,800$447,400
Barrie and District$687,400-5.3%$728,200$472,100$420,100
Cambridge$662,700-4.2%$707,600$572,500$388,100
Kitchener-Waterloo$630,200-5.6%$753,400$497,900$356,300
Northumberland Hills$628,600-2.5%$640,500$444,600not published
Ottawa$623,500-0.3%$705,100$546,500$380,800
Lakelands$610,600-4.8%$630,000$513,100$428,400
Brantford Region$610,000-7.7%$638,200$508,500$343,400
Windsor-Essex$570,000-2.5%$618,900$422,600$368,500
Calgary$569,200+0.2%$679,600$443,400$304,900
Peterborough and the Kawarthas$568,200-3.8%$568,200not publishednot published
Simcoe and District$567,900-3.4%$568,600$458,100not published
Niagara Region$567,400-4.6%$590,700$513,700$355,400
Woodstock-Ingersoll-Tillsonburg$566,700-5.1%$582,600$377,700not published
Grey Bruce Owen Sound$555,200-1.7%$564,200$438,700$369,500
London-St Thomas$552,500-2.6%$600,700$421,500$317,100
Kawartha Lakes$547,400-8.6%$547,400not publishednot published
Kingston and Area$542,800+0.5%$566,800$403,300$342,700
Huron Perth$538,900-2.7%$546,100not published$393,200
Rideau St Lawrence$513,200-5.3%$527,900$513,600$256,800
Sudbury$498,000-1.2%$498,000not publishednot published
Quinte and District$478,100-6.9%$480,900$366,000not published
Bancroft and Area$420,700-13.5%$420,700not publishednot published
North Bay$418,600-1.7%$418,600not publishednot published
Edmonton$416,700-0.1%$501,900$269,500$197,800
Sault Ste Marie$311,800-2.4%$311,800not publishednot published

Three things worth reading off that table rather than past it. The spread between the most and least expensive board areas in Ontario is wider than the gap between the Ontario and Alberta provincial composites. Apartment benchmarks are the weakest segment across most areas. And several northern and eastern Ontario areas publish only a composite and a single-family figure, because the townhouse and apartment samples are too small to model.

The citable fact: CREA publishes a composite and single-family benchmark for every board area in this table and publishes townhouse and apartment benchmarks only where the sample supports them.

The down payment

What does a benchmark mean for a minimum down payment?

Short answer

The minimum on an insured purchase is federal rather than local: 5% of the first $500,000 of value and 10% of the portion above it, under the loan-to-value criterion in the Eligible Mortgage Loan Regulations. The local part is only which side of $500,000 the benchmark falls on.

That single threshold is what makes the table above read differently than it looks. An area whose composite is below $500,000 sits entirely in the 5% tier. An area above it has a two-part calculation, and the second part is twice the rate of the first.

The minimum insured down payment on four composite benchmarks from the table above. Our arithmetic on the regulation, not quotes.
Area and compositeCalculationMinimum down payment
Edmonton, $416,7005% of the whole benchmark$20,835
Quinte and District, $478,1005% of the whole benchmark$23,905
Kitchener-Waterloo, $630,200$25,000 plus 10% of $130,200$38,020
Greater Toronto, $917,600$25,000 plus 10% of $417,600$66,760

Note what that comparison shows. The Greater Toronto benchmark is roughly 2.2 times the Edmonton one, and its minimum down payment is roughly 3.2 times larger. The tiering is why the cash requirement rises faster than the price does.

The same arithmetic on your own figures, including the insurance premium that follows from the loan-to-value band, is on our insured down payment calculator.

The citable fact: because the minimum insured down payment is 5% of the first $500,000 of value and 10% above it, the cash requirement rises faster than the purchase price across the range in this table.

The gaps

Which cities does CREA not cover, and what do we use instead?

Short answer

A good many. CREA publishes only three Alberta geographies, the province, Calgary and Edmonton, and nothing for Red Deer, Lethbridge or Canmore. Several Ontario cities have no sheet either. Where there is no benchmark we publish CMHC average rents and say plainly that it is rental data.

All sixty sheet names in CREA’s October 2026 archive were listed and checked before this was written. Where a city has no sheet, we do not borrow a neighbouring area’s figure, because a page carrying the wrong city’s benchmark is worse than a page carrying none.

CMHC average rents via Statistics Canada table 34-10-0133, row and apartment structures of three units and over, reference 2025, released 17 December 2025
CityBachelorOne bedroomTwo bedroomThree bedroom
Canmore, Albertanot published$1,858$2,438$3,676
Red Deer, Alberta$1,036$1,220$1,418$1,677
Thunder Bay, Ontario$976$1,173$1,493$1,794
Sarnia, Ontario$971$1,235$1,502$1,626
Chatham-Kent, Ontario$1,188$1,203$1,365$1,199
Timmins, Ontario$859$1,177$1,291$1,528
Cornwall, Ontario$956$1,082$1,276$1,352
Pembroke, Ontario$855$953$1,200$1,766
Hawkesbury, Ontario part$651$764$1,108$1,389
Kenora, Ontarionot published$1,005not publishednot published

Where a cell says “not published”, that is Statistics Canada’s own answer: the survey reached too few units of that type for the figure to meet its reliability standard, so it is withheld. Kenora is the clearest case, with only a one bedroom figure surviving.

This is rental data and not a resale price. It answers the rent-against-buy question and the investor yield question, and it does not tell you what a house sells for. Two cities have neither a CREA benchmark nor a Statistics Canada rent entry, the town of Perth in Lanark County and Shelburne, and their pages say so rather than substituting a neighbour’s figure.

The citable fact: CREA’s MLS Home Price Index covers only three Alberta geographies, the province, Calgary and Edmonton, so Red Deer, Lethbridge and Canmore have no CREA benchmark at all.

Town level

Are there figures for individual towns rather than board areas?

Short answer

For a few, yes. The Toronto Regional Real Estate Board publishes HPI benchmarks for individual municipalities in its monthly Market Watch, which is how two towns on this site have a figure of their own rather than a regional one. TRREB’s report is also a month ahead of CREA’s archive.

TRREB MLS Home Price Index benchmarks, October 2026, town level
TownCompositeYear over yearDetachedApartment
Orangeville, reported as Dufferin County$721,100+0.40%$853,900$371,500
New Tecumseth, covering Alliston, Beeton and Tottenham$756,700-5.48%$828,400$441,600

Those two are worth reading side by side because they are a month apart from everything else on this page and they are moving in opposite directions. Orangeville’s composite is marginally up on October 2025 while New Tecumseth’s is down 5.48%, which is a reminder that a provincial figure is an average of places doing different things.

Local pages for both carry the full breakdown: Orangeville and New Tecumseth.

The citable fact: TRREB publishes municipal-level MLS Home Price Index benchmarks in its monthly Market Watch, which is why town-level figures exist for some municipalities and not for others.

The method

How were these figures read, and what could be wrong with them?

Short answer

From CREA’s own data archive rather than from a news report. The dollar benchmarks sit in columns H to M of the not-seasonally-adjusted workbook; columns B to G are index values near 100. Reading the wrong columns is the obvious failure and not the dangerous one.

What could be wrong, stated plainly:

  • The year-over-year column is ours. It is the current month against the same month a year earlier, from the same sheet. CREA does not publish it in this form, and we label it as a calculation wherever it appears.
  • Sheet order is not sheet number. The workbook’s sheet names map to files through a relationships file rather than in order, and assuming otherwise would silently return a different area’s series.
  • A board’s own figure may differ. For the same month and the same name, because boards aggregate differently. We cite one source per figure and never blend them in a row.
  • Small areas move more. Where an apartment or townhouse benchmark comes from a thin sample, a large percentage change can reflect the sample rather than the market.

Eight geographies in this data were cross-checked against an independently sourced extraction from three weeks earlier and all eight matched to the dollar: the national aggregate, Ontario, Alberta, Calgary, Edmonton, Ottawa, Greater Toronto and Kitchener-Waterloo. That agreement is what licenses the rest of the table.

The citable fact: the benchmark dollar figures in CREA’s not-seasonally-adjusted workbook are in columns H to M, and columns B to G hold index values rather than prices.

The refresh

When does this page change?

Short answer

When CREA publishes the next monthly package. The next one lands 17 November 2026 and carries October data, and this page and every local page built from the same table are scheduled for update then.

September 2026 is the latest published month as at the date on this page. The November archive did not exist when this was written, which was checked rather than assumed: the file returns a 404 until it is published, and a 404 on that URL means the month is not out yet rather than that the address changed.

TRREB’s Market Watch runs a month ahead on its own schedule, so the two town-level figures above update in early December 2026 with November data.

The rent figures move once a year. CMHC’s rental market survey for 2025 was released on 17 December 2025, and the next release replaces it.

The citable fact: CREA publishes its MLS Home Price Index package monthly, so a benchmark quoted without a month and a retrieval date is not a usable figure.

Who to ask

Who do you need if you are using these numbers to decide something?

Short answer

Your broker to turn a benchmark into a qualification, a REALTOR to tell you what the benchmark hides in a specific neighbourhood, and an appraiser only when there is a property.

  • Your broker, first. A benchmark tells you the cash requirement in an area. What you qualify for is a different question, and the two together are the budget.
  • A REALTOR in the area. A board area average can be fifteen per cent away from a particular street. The index is a trend, not a listing price.
  • An appraiser, once there is an address. The lender orders this, and it is the number the mortgage is measured against rather than anything on this page.
  • For the trend question, the table is enough on its own. It answers “is this area moving up or down” without an opinion attached, which is the question it is good at.

Bring two things to the first conversation: the area you are looking at and an honest figure for the cash you have. Those two decide which rows of the table above are relevant to you.

Have a question? Chat with our team or AI assistant directly on pekoe.ca.

The citable fact: a benchmark establishes the cash requirement in an area while qualification establishes the borrowing capacity, and a purchase budget needs both.

F.A.Q.

Frequently asked questions

What is the difference between a benchmark and an average price?

A benchmark is the modelled price of a typical home, held constant so the series reflects price movement. An average is whatever happened to sell that month, so it moves with the mix as well as with prices.

Is a board area the same as a city?

No. A real estate board’s area usually takes in more ground than its name suggests, so “Kitchener-Waterloo” and “Guelph and District” cover more than those municipalities.

Which month are these figures for?

September 2026, not seasonally adjusted, read from CREA’s October 2026 data archive on 5 November 2026. The two TRREB town-level figures are October 2026.

Is the year-over-year column from CREA?

No, it is ours. It compares the current month with the same month a year earlier from the same series, and it is labelled as our calculation everywhere it appears.

Why do some areas show “not published”?

Because CREA does not publish that property type for that area, which usually means the sample is too small to model. Several northern and eastern Ontario areas have a composite and a single-family figure only.

Why is there no Red Deer or Canmore benchmark?

CREA publishes only three Alberta geographies: the province, Calgary and Edmonton. All sixty sheets in the October 2026 archive were checked. Those cities use CMHC rent data instead, clearly labelled as rental data.

Can I use a nearby area’s benchmark for my city?

We do not, and we would advise against it. A page carrying the wrong city’s benchmark is worse than one carrying none, and the Perth County against town of Perth confusion is a good example of how that goes wrong.

How much down payment do I need on these numbers?

Five per cent of the first $500,000 of value and ten per cent of the portion above it, on an insured purchase. On the Greater Toronto composite of $917,600 that is $66,760, which is our arithmetic on the regulation.

Does a benchmark tell me what my house is worth?

No. It describes an area. An appraisal describes a property, and on a mortgage the appraisal is the number that governs.

Why does a local board quote a different figure?

Because boards aggregate their own areas differently from CREA. Both can be correct for the same month. Cite one source per figure and name it rather than blending them.

How often is this updated?

Monthly, with CREA’s package. The next one lands 17 November 2026 with October data, and this page and the local pages built from the same table update then.

Where do the rent figures come from?

CMHC’s rental market survey, reported through Statistics Canada table 34-10-0133, for row and apartment structures of three units and over. Reference period 2025, released 17 December 2025.

Are these figures seasonally adjusted?

No. The CREA figures here are from the not-seasonally-adjusted series, which is the one to use when comparing an area with itself a year earlier.

Is the chat on this page a bot?

No. It reaches the Pekoe team, and a licensed broker answers live during business hours or replies directly outside them. There is no AI persona pretending to be an advisor.

Find out what your own number is

A benchmark tells you about an area. An appraisal tells you about a property, and a pre-approval tells you about you. The three together are a plan.


Down payment calculator

Pekoe Financial Inc. o/a Pekoe Mortgages is a licensed mortgage brokerage. Ontario: FSRA Licence #13321. Alberta: licensed with RECA. Benchmarks are CREA’s MLS Home Price Index, not seasonally adjusted, series to September 2026, read from MLS_HPI_Oct_2026.zip on 5 November 2026. The year-over-year column is our own arithmetic on CREA’s series and is not a CREA-published figure. Rent figures are CMHC’s rental market survey through Statistics Canada table 34-10-0133, reference 2025, released 17 December 2025. Town-level benchmarks are from the Toronto Regional Real Estate Board’s Market Watch for October 2026. A board area is not a municipality and a benchmark is not an average, and neither is a valuation of your property. No interest rate appears on this page. Live rates are at pekoe.ca/rates.