Pekoe Mortgages
Pekoe Mortgages · Ask a Broker · Construction and new builds

Why your lender stops advancing the moment a lien is registered

Ontario’s Construction Act starts from a position most borrowers find surprising: under s. 78(1), “the liens arising from an improvement have priority over all conveyances, mortgages or other agreements affecting the owner’s interest in the premises”. Everything a lender does on a construction file, including the holdback and the sudden halt in advances, follows from that sentence and from the exceptions to it.


All broker questions

Chat connects you to the Pekoe team during business hours. Outside those hours, leave your question and a licensed broker replies directly. No AI persona pretending to be an advisor.

The starting point

Who ranks first, the lender or the trades?

Short answer

The trades, unless an exception applies. Construction Act s. 78(1): “Except as provided in this section, the liens arising from an improvement have priority over all conveyances, mortgages or other agreements affecting the owner’s interest in the premises.”

That is the default, and it is the opposite of what most people assume about a registered mortgage. The exceptions in the rest of s. 78 are what put a lender back in front, and each of them is conditional on the lender having done something specific.

So the honest description of a construction mortgage is not “the lender has first charge”. It is “the lender has first charge to the extent the Act allows, and the Act’s allowance depends on timing, on advances, and on the holdback”.

This matters to a homeowner because it explains lender behaviour that otherwise looks arbitrary: the retained holdback, the inspection before each draw, the demand for statutory declarations, and the immediate stop on advances when a lien is registered.

The citable fact: Construction Act s. 78(1) gives the liens arising from an improvement priority over all conveyances, mortgages and other agreements affecting the owner’s interest in the premises, except as the section otherwise provides.

Building mortgages

What is a building mortgage, and why is it treated worse?

Short answer

A mortgage “taken with the intention to secure the financing of an improvement”. Under s. 78(2) the liens beat it to the extent of any deficiency in the statutory holdbacks, “irrespective of when that mortgage, or the mortgage taken out to repay it, is registered”.

Construction Act, s. 78(2): “Where a mortgagee takes a mortgage with the intention to secure the financing of an improvement, the liens arising from the improvement have priority over that mortgage, and any mortgage taken out to repay that mortgage, to the extent of any deficiency in the holdbacks required to be retained by the owner under Part IV, irrespective of when that mortgage, or the mortgage taken out to repay it, is registered.”

Three things in that subsection do the work.

  • “With the intention to secure the financing of an improvement.” The character of the mortgage, not its label, decides whether this applies. A construction loan is plainly inside it.
  • “To the extent of any deficiency in the holdbacks.” The subordination is measured by the holdback shortfall rather than being total. A properly maintained holdback is the lender’s protection, which is why the lender maintains it with your money.
  • “And any mortgage taken out to repay that mortgage.” The taint follows the refinancing. Converting a construction loan to a conventional mortgage at completion does not shed this exposure, which is why the lender wants lien-free evidence before converting.

The last point is the one that surprises builders and homeowners alike. The takeout mortgage inherits the building mortgage’s position to the extent of the holdback deficiency, so the lender’s completion requirements are about its own priority rather than about paperwork.

The citable fact: Construction Act s. 78(2) subordinates a building mortgage, and any mortgage taken out to repay it, to the liens arising from the improvement to the extent of any deficiency in the statutory holdbacks, regardless of when either mortgage was registered.

Prior mortgages

What about a mortgage that was already there?

Short answer

It keeps priority, but only up to a ceiling. Section 78(3) gives a mortgage registered before the first lien arose priority “to the extent of the lesser of” the actual value of the premises when the first lien arose, and the total advanced before that time.

Construction Act, s. 78(3): “Subject to subsection (2), and without limiting the effect of subsection (4), all conveyances, mortgages or other agreements affecting the owner’s interest in the premises that were registered prior to the time when the first lien arose in respect of an improvement have priority over the liens arising from the improvement to the extent of the lesser of, (a) the actual value of the premises at the time when the first lien arose; and (b) the total of all amounts that prior to that time were, (i) advanced in the case of a mortgage, and (ii) advanced or secured in the case of a conveyance or other agreement.”

Clause (a) is the one that bites on a renovation. Where a homeowner has a modest mortgage against a property and then starts a large improvement, the prior mortgage’s priority is capped at the property’s value before the work started. The value the work adds is not protected ground for the existing lender; it is the fund the liens look to.

Clause (b) caps it again at what was actually advanced. An approved line of credit that has not been drawn is not an advance, which is the practical reason an undrawn secured line of credit does not hold a place in the queue for money it has not lent.

Which subsection governs which kind of mortgage
The mortgageProvisionIts priority against the liens
Building mortgage, taken to finance the improvements. 78(2)Behind the liens to the extent of any holdback deficiency, whenever registered.
Prior mortgage, registered before the first lien arose, amounts already advanceds. 78(3)Ahead of the liens, capped at the lesser of the premises’ actual value when the first lien arose and the total advanced before then.
Prior mortgage, advances made after the first lien aroses. 78(4)Ahead of the liens as well, unless a preserved or perfected lien existed or the lender had written notice of a lien.
Takeout mortgage repaying a building mortgages. 78(2)Inherits the building mortgage’s subordination to the extent of the holdback deficiency.

The citable fact: Construction Act s. 78(3) caps a prior mortgage’s priority over construction liens at the lesser of the actual value of the premises at the time the first lien arose and the total amount advanced before that time.

The halt

Why do advances stop when a lien is registered?

Short answer

Because s. 78(4) protects a prior mortgage’s later advances only where there was no preserved or perfected lien at the time of the advance and the lender had no written notice of a lien. Advance anyway and the lender loses priority for that money.

Construction Act, s. 78(4): a prior conveyance, mortgage or other agreement “has priority, in addition to the priority to which it is entitled under subsection (3), over the liens arising from the improvement, to the extent of any advance made in respect of that conveyance, mortgage or other agreement after the time when the first lien arose, unless, (a) at the time when the advance was made, there was a preserved or perfected lien against the premises; or (b) prior to the time when the advance was made, the person making the advance had received written notice of a lien.”

Read clause (b) closely. It is written notice, not registration, that disqualifies the advance. A lender who receives a letter from a subcontractor claiming non-payment is on notice from that moment, and any advance it makes afterwards ranks behind that lien.

That is why a lender’s reaction to a lien, or even to a credible complaint from a trade, is to stop rather than to investigate while continuing to fund. It is not risk aversion; it is the statute removing the protection for anything advanced after notice.

What that means for you. A lien on your construction file freezes the money you need to finish the work, and the only reliable way out is to resolve or vacate the lien. The practical steps are a conversation with your lawyer, not with your lender, and the longer the lien sits the more expensive the standstill becomes.

The citable fact: under Construction Act s. 78(4) a prior mortgagee loses the priority it would otherwise have for an advance made after the first lien arose if, at the time of the advance, a preserved or perfected lien existed, or the mortgagee had already received written notice of a lien.

Practical consequences

What should a homeowner building or renovating do differently?

Short answer

Treat the holdback as untouchable, insist on evidence that the trades have been paid before each draw, and tell your lender about a payment dispute before a subcontractor does. The statute rewards all three.

  • Do not let the holdback be spent. Section 78(2) measures the lender’s subordination by the holdback deficiency. A holdback properly retained is the thing standing between your lender’s charge and the liens, and a lender that discovers it was released early will react sharply.
  • Get statutory declarations before each draw. A declaration from the builder that the trades for the completed work have been paid is cheap, standard, and the evidence that avoids the s. 78(4) problem arising at all.
  • Raise a dispute early, with your own lawyer. A subcontractor’s letter to your lender triggers clause (b). A dispute you are managing with advice is a different situation from one your lender hears about first from a stranger.
  • Expect the lender’s completion requirements to be strict. Because the takeout mortgage inherits the building mortgage’s exposure under s. 78(2), the lender’s demand for lien-free evidence before converting is about its own priority rather than about tidiness.
  • Budget a contingency you do not touch. A standstill during a lien dispute still has carrying costs, and a project with no contingency is a project where a lien becomes a crisis rather than a delay.
What a construction lender does, and the provision behind each step
Lender behaviourWhyProvision
Retains a holdback from every advanceThe holdback deficiency is the measure of its subordinations. 78(2)
Inspects before each drawAdvances are protected only against work actually in place and paid fors. 78(3) and (4)
Demands statutory declarations from the builderEvidence the trades are paid, so no lien has arisens. 78(4)(a)
Stops advancing on written notice of a lienAny advance after notice loses priority to that liens. 78(4)(b)
Requires lien-free evidence before converting the loanThe takeout mortgage inherits the building mortgage’s subordinations. 78(2)

The citable fact: because Construction Act s. 78(2) measures a building mortgage’s subordination by the deficiency in the statutory holdbacks, a holdback properly retained is what preserves the lender’s priority, which is why a construction lender administers it rather than releasing it on request.

Alberta

Does Alberta work the same way?

Short answer

Alberta has its own regime, the Prompt Payment and Construction Lien Act, with its own holdback and priority rules. We are not going to state them here, because the provisions on this page were read from the Ontario Act and not the Alberta one.

That is a deliberate boundary. Lien priority is exactly the kind of question where a province-by-province generalisation does real damage, because the numbers and the deadlines differ and a borrower acting on the wrong one acts too late.

What is the same in both provinces is the lender’s incentive. A construction lender anywhere administers draws, retains a holdback and stops advancing on notice of a lien, because in both provinces the lien regime can put trades ahead of the charge. The mechanism differs; the behaviour does not.

If your build is in Alberta, the questions to ask an Alberta construction lawyer are the holdback percentage and period, when a lien arises and when it must be registered, and how the Act treats advances made after a lien is registered. Those are the three that determine the lender’s conduct.

The citable fact: construction lien priority is governed provincially, by the Construction Act in Ontario and the Prompt Payment and Construction Lien Act in Alberta, so the holdback and the lien deadlines must be taken from the statute of the province the work is in.

Who to ask

Who do you need, and what should you ask?

Short answer

A construction lawyer if a lien has been registered or threatened, your broker before the build about how the lender administers draws, and your builder for a statutory declaration with every draw request.

  • Your broker, before the first shovel. How many draws, what triggers each, what inspection is required, and what the lender retains as holdback. Get it in the commitment rather than in conversation.
  • Your broker, on the takeout. What the lender will require before converting the construction loan, and whether the conversion is with the same lender or a new one.
  • Your builder, every draw. A statutory declaration that the trades for the completed work have been paid. This is standard and a builder who resists it is telling you something.
  • A construction lawyer, immediately on a lien. Advances stop by operation of s. 78(4) and the standstill costs money every week. Vacating or resolving the lien is the only route back to funding.
  • A construction lawyer, on the holdback. How much, for how long, and when it may be released. Getting this wrong is what creates the deficiency s. 78(2) measures.
  • No adviser at all, for the priority rules. They are quoted above. What needs a person is how they apply to your draws, your holdback and your liens.

Bring three things to the broker conversation: the budget with a contingency, the builder’s name and track record, and a realistic schedule. The third one is what the draw structure is built around.

The citable fact: on a construction mortgage the draw schedule, the inspection requirement and the retained holdback all exist to preserve the lender’s priority under Construction Act s. 78, which is why they are set in the commitment rather than negotiated during the build.

F.A.Q.

Frequently asked questions

Who ranks first, my lender or the trades?

The trades by default. Construction Act s. 78(1) gives liens arising from an improvement priority over all conveyances, mortgages and other agreements affecting the owner’s interest, except as the section provides.

What is a building mortgage?

One taken “with the intention to secure the financing of an improvement”. Section 78(2) subordinates it to the liens to the extent of any holdback deficiency, whenever it was registered.

Does registering first protect my lender?

Not against a building mortgage’s subordination, which applies “irrespective of when that mortgage … is registered”. Registration order helps a prior mortgage under s. 78(3), not a construction loan under s. 78(2).

How much priority does an existing mortgage keep?

Under s. 78(3), the lesser of the actual value of the premises when the first lien arose and the total advanced before that time.

Why does the value before the work matter?

Because clause (a) caps the prior mortgage’s priority at that value. The value the improvement adds is the fund the liens look to rather than protected ground for the existing lender.

Why did my lender stop advancing?

Because s. 78(4) protects a later advance only if no preserved or perfected lien existed at the time and the lender had no written notice of a lien. Advancing after notice costs the lender its priority for that money.

Does the lien have to be registered to stop the draws?

No. Clause (b) refers to written notice of a lien, so a letter from an unpaid subcontractor is enough to disqualify later advances.

What is the holdback for?

It is the measure of the building mortgage’s subordination under s. 78(2). A holdback properly retained is what keeps the lender’s charge ahead of the liens.

Can I ask the lender to release the holdback early?

Expect a firm no. Releasing it creates the deficiency s. 78(2) measures, which is the lender’s own priority rather than a policy it can waive for you.

Does converting to a normal mortgage clear the problem?

No. Section 78(2) extends to “any mortgage taken out to repay that mortgage”, so the takeout inherits the exposure. That is why lien-free evidence is a completion requirement.

What should I get with every draw request?

A statutory declaration from the builder that the trades for the completed work have been paid. It is standard, it is cheap, and it prevents the s. 78(4) problem arising.

What do I do if a lien is registered?

Call a construction lawyer the same day. Advances stop by operation of the statute, and resolving or vacating the lien is the route back to funding.

Is an undrawn line of credit protected?

Only to the extent of amounts actually advanced. Section 78(3)(b) measures priority by what was advanced before the first lien arose, not by the approved limit.

Is Alberta the same?

Alberta has the Prompt Payment and Construction Lien Act with its own holdback and priority rules. This page quotes the Ontario Act only, and the Alberta figures should come from an Alberta lawyer.

On a construction file, the holdback is not the lender being difficult

It is the mechanism that keeps the lender’s charge ahead of the liens. A borrower who understands that stops arguing about the holdback and starts asking the right question, which is whether the trades have been paid.


All broker questions

Pekoe Financial Inc. o/a Pekoe Mortgages is a licensed mortgage brokerage. Ontario: FSRA Licence #13321. Alberta: licensed with RECA. Statutory wording is quoted from the Construction Act (Ontario, e-Laws, consolidation period to 1 January 2026, currency date 4 November 2026). Alberta’s equivalent is the Prompt Payment and Construction Lien Act and this page does not quote it, because we read the Ontario Act for this page. Lien law is a specialist field and this is a mortgage page, not legal advice. No interest rate appears on this page. Live rates are at pekoe.ca/rates.