Pekoe Mortgages
Pekoe Mortgages · Ask a Broker · Commercial

Financing industrial property: the building’s specifications are half the underwriting

Industrial is the one commercial asset class where the physical building decides as much as the lease does. Clear height, loading, power and floor loading determine who can occupy the unit if your tenant leaves, and that re-lease pool is what a lender is really assessing. Prior use decides the rest, because what happened on the site before you can stop an advance entirely.


All commercial mortgages

Chat connects you to the Pekoe team during business hours. Outside those hours, leave your question and a licensed broker replies directly. No AI persona pretending to be an advisor.

The specs

Why do a building’s specifications matter so much?

Short answer

Because they decide who can occupy the unit if the tenant leaves. A lender is not only asking whether the current tenant pays, it is asking how quickly the space re-lets at a similar rent, and on industrial that answer is set by the building rather than by the market.

A warehouse with low clear height and one dock door serves a much smaller pool of occupiers than the same square footage with high ceilings and several doors. Same floor area, different asset.

The specifications that set an industrial building’s re-lease pool.
SpecificationWhy a lender cares
Clear heightRacking capacity, which decides whether modern logistics occupiers can use it at all
LoadingDock-level versus grade-level doors, and how many, narrows or widens the occupier pool
PowerAvailable service limits what manufacturing or processing uses can move in
Floor loading and column spacingWhat can be stored or installed, and how efficiently the space works
Office finish ratioToo much office in a warehouse is expensive space that industrial tenants will not pay for
Yard and truck accessWhether a tractor-trailer can actually manoeuvre on site

The citable fact: industrial lending weighs clear height, loading, power, floor loading and yard access because those specifications determine the pool of occupiers who could re-lease the space, which is the lender’s protection if the tenant leaves.

Prior use

Why does what happened on the site before matter?

Short answer

Because contamination follows the land, not the owner who caused it. On industrial property this is the single most common reason an otherwise strong file stops, and it is checkable long before closing.

Manufacturing, metal finishing, fuel storage, vehicle servicing and chemical handling all leave questions that a lender will want answered by a qualified person rather than by a vendor’s assurance.

The practical consequence is a timeline one. An environmental assessment is not a document you obtain in the last week of a conditional period, and the result can change the price, the lender or whether the deal proceeds. Our page on Phase 1 environmental assessments covers what lenders ask for and when.

The citable fact: environmental condition attaches to the land rather than to the owner who caused it, so prior industrial use is assessed before a lender advances and the assessment timeline has to sit inside the conditional period.

Changing the use

What if you want to convert it to something else?

Short answer

The standards get stricter, and Ontario’s rules say so explicitly. Under O. Reg. 153/04 section 3(2), “a residential use, parkland use or institutional use is more sensitive than an industrial use, commercial use or community use”, and an agricultural or other use is the most sensitive of all.

That ranking matters in two ways. Converting an industrial building to residential moves it to a more sensitive category, which raises the applicable site condition standards rather than leaving them where they were.

And on a property with more than one use, section 3(1) provides that the applicable standards are those for the most sensitive type of use on it. So adding a residential component to an industrial site can lift the standard for the whole property, not just the new part.

None of that makes a conversion impossible. It does mean the environmental work on a conversion is a different and larger exercise from the environmental work on a straight industrial purchase, and it belongs in the budget and the timeline from the start.

The citable fact: O. Reg. 153/04, s. 3(2) ranks residential, parkland and institutional uses as more sensitive than industrial, commercial or community uses, and s. 3(1) applies the standards of the most sensitive use where a property has more than one, read from the consolidated regulation, state current, consolidation period 23 October 2026, retrieved 18 November 2026.

The tenancy

Single tenant or multi-tenant: which does a lender prefer?

Short answer

Neither, inherently. A single strong covenant on a long lease and a diversified multi-tenant building are both financeable, and they fail in different ways. What a lender wants is for you to have understood which risk you are taking.

  • Single tenant. Simple to underwrite and binary in outcome. If that tenant leaves, income goes to zero rather than down, so the covenant and the remaining term carry the whole file.
  • Multi-tenant. More resilient to any one departure and more work to assess, with more management cost and usually more turnover.
  • Owner-occupied. A different test again, assessed on your business rather than on leases. Our page on owner-occupied commercial mortgages covers it.

On a single-tenant building, ask what the space would re-let for rather than what it earns now. If the current rent is well above what the specifications support, the income is less durable than the rent roll suggests.

The citable fact: a single-tenant industrial building concentrates the whole income in one covenant, so the lease term and covenant strength carry the file, while a multi-tenant building spreads that risk at the cost of more management and turnover.

The file

What will a lender ask you for?

Short answer

The leases, the building specifications and the site history. Industrial is the asset class where the physical and environmental documents matter as much as the financial ones.

What an industrial file normally contains.
DocumentWhat it establishes
Rent roll and leasesThe income, and how long it is contracted for
Building specificationsClear height, loading, power, floor loading, office ratio
Site and prior use historyWhether an environmental assessment is required
Environmental assessment, where warrantedThe condition of the land itself
Zoning confirmationThat the current and intended uses are permitted
Two to three years of operating statementsWhat the property costs to run

Where the current use predates the current zoning, confirm its standing before relying on it. Our page on legal non-conforming use covers how that protection is lost.

The citable fact: an industrial mortgage file is assessed on the leases, the building’s physical specifications and the site’s prior use together, because any one of the three can determine whether a lender advances.

Who to ask

Who do you need, and what should you ask?

Short answer

An environmental consultant early, the municipality on zoning, a commercial realtor on what the specifications are worth in that submarket, and your broker once those answers exist.

  • An environmental consultant, first on anything with an industrial history. What assessment applies, how long it takes and what the likely findings are given the prior use.
  • The municipality, on zoning. What is permitted today, and whether the current use relies on a non-conforming status.
  • A commercial realtor in that submarket. What this building re-lets for given its clear height and loading, rather than what it earns now.
  • Your lawyer, on the leases. Term, renewal, who pays for structural repair, and what happens on a sale.
  • Your lawyer, if you plan a conversion. What changing to a more sensitive use triggers, before you price the project.
  • Your broker, last. With the specs, the zoning and the environmental position known, the financing conversation is short.

Bring three things to the broker conversation: the leases, the building specifications and the site’s prior use. On industrial, the third one is the one that most often changes the answer.

The citable fact: the first question on an industrial purchase with any manufacturing or fuel-handling history is what environmental assessment applies, because that answer sets both the timeline and whether a lender will advance at all.

F.A.Q.

Frequently asked questions

How is an industrial property mortgage underwritten?

On the income, like any commercial investment property, but with unusual weight on the building’s physical specifications, because those decide who could re-lease the space if the tenant leaves.

Which specifications matter most?

Clear height and loading, then power, floor loading, column spacing and yard access. A low-ceilinged unit with one grade door serves a far smaller occupier pool than the same floor area built higher with multiple docks.

Why is prior use such a big issue?

Environmental condition attaches to the land, not to the owner who caused it. Manufacturing, metal finishing, fuel storage and vehicle servicing all raise questions a lender wants answered by a qualified person.

When should I order the environmental work?

Early. An assessment is not a last-week-of-conditions document, and the result can change the price, the lender, or whether the deal proceeds at all.

I want to convert an industrial building to residential. What changes?

The applicable standards get stricter. O. Reg. 153/04 s. 3(2) ranks residential, parkland and institutional uses as more sensitive than industrial, commercial or community uses.

What if only part of the property becomes residential?

Section 3(1) applies the standards of the most sensitive use on the property. So adding a residential component can lift the standard for the whole site, not just the new part.

Is a single-tenant building riskier than multi-tenant?

Different rather than riskier. Single tenant is binary: if they leave, income goes to zero rather than down. Multi-tenant spreads that at the cost of more management and turnover.

The current rent looks high for the building. Does that matter?

Yes. Ask what the space would re-let for given its specifications. Rent well above what the building supports is less durable income than the rent roll suggests.

What if the current use predates the zoning?

Confirm its standing before relying on it. Legal non-conforming protection can be lost, and a lender will want to know the use is secure.

Does Pekoe place industrial deals directly?

Yes. Industrial and warehouse space is placed directly through Pekoe’s commercial lender panel, alongside multi-unit, retail, office, mixed-use, owner-occupied, commercial condo and raw land.

Is Pekoe’s chat a real person or an AI bot?

A real licensed broker during business hours. Outside them you leave a question and a broker replies directly, rather than an AI persona answering as though it were an advisor.

Send the specs and the site history

On industrial, the building’s specifications and what was done on the site before you answer most of a lender’s questions.


All broker questions

Pekoe Financial Inc. o/a Pekoe Mortgages is a licensed mortgage brokerage. Ontario: FSRA Brokerage Licence #13321. Alberta: licensed by RECA. Principal broker Daniel Johanis, Mortgage Broker Licence No. M16000320, Member of Mortgage Professionals Canada (MPC), formerly CAAMP. This page is general information, not legal or environmental advice. Whether a record of site condition is required, and what any assessment must cover, are questions for a qualified person and for a lawyer. No rate, fee, penalty, loan-to-value figure or lender name appears on this page.